Pro Convert HDMI 4K Plus 影音網路 4K NDI 連結轉換器,一路4K訊號轉換器
● 將一路 HDMI 信號+內嵌音訊轉為 NDI 視訊
● LOOP 輸出一路 HDMI 信號+內嵌音訊
美樂威 Magewell Pro Convert 系列
Magewell Pro Convert HDMI 4K PLUS 網路 NDI 連結轉換器
Magewell Pro Convert HDMI PLUS 網路 NDI 連結轉換器
Magewell Pro Convert HDMI TX 網路 NDI 連結轉換器
Magewell Pro Convert SDI 4K PLUS 網路 NDI 連結轉換器
Magewell Pro Convert SDI PLUS 網路 NDI 連結轉換器
Magewell Pro Convert SDI TX 網路 NDI 連結轉換器
Magewell Pro Convert AIO 網路 NDI 連結轉換器
Magewell Pro Convert for NDI to HDMI 4K 網路 NDI 連結轉換器
Magewell Pro Convert for NDI to HDMI 網路 NDI 連結轉換器
詳細規格
Model | Pro Convert HDMI 4K Plus | ||
Supported Web Browser (tested) |
Microsoft Internet Explorer 11 Microsoft Edge Mozilla Firefox version 61 and above Google Chrome version 49 and above Apple Safari 11.1 and above Opera 55.0.2994.44 and above |
||
Supported Software (tested) |
OBS XSplit vMix VidBlasterX Wirecast streamstar SW mimoLive Any other NewTek NDI-enabled encoding or streaming software |
||
Input Interfaces |
HDMI - DVI-D 1.0 - HDMI 1.4 - HDMI 2.0 |
||
Loop-through Interface |
HDMI - DVI-D 1.0 - HDMI 1.4 - HDMI 2.0 |
||
Storage Interface | SD Card (functions to be developed) | ||
PTZ + TALLY Control | Mini-DIN–8 jack | ||
Screw Mounting Hole | ¼–20 mounting hole | ||
Network Interfaces |
10/100/1000Mbps Ethernet IEEE 802.3af PoE |
||
USB Interface |
USB2.0 Type B 5V/2.1A power supply USB RNDIS/ECM |
||
Input feature | Support for input video resolutions up to 4:4:4 8-bit 4096x2160 60fps | ||
HDMI Specific Features |
600MHz HDMI receiver Adaptive HDMI equalizer Support for customized EDID Support for extraction of AVI/Audio InfoFrames Full colorimetry support Support for up to 4096x2160 4:4:4 60fps input signals Support for 8 channel IEC60958 audio streams Support for extraction of audio formation information & channel status data Support for extraction of video timing information Support for extraction of 3D format information Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode. |
||
NDI Output Format |
Support for 4:2:2 8-bit output Support for up to 4096x2160 60fps or 1920x1080 240fps Support for NDI 4.1 |
||
Video Processing Features |
Video processing pipelines with 4096x2160 60fps Video brightness, contrast, saturation, hue adjustment Video de-interlacing - Top field only - Bottom field only Video aspect ratio conversion - Auto or manual selection of output aspect ratio Video color format conversion - Auto or manual selection of input color format & quantization range - Auto or manual selection of output color format, quantization range & saturation range - Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats - Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats - Support for Limited or Full quantization range - Support for Limited, Full & ‘Extended gamut’ saturation range Video frame rate conversion Video mirror flip |
||
NDI Source Name |
Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’. Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’. Support for setting board-index, from 0 to F, through on-board rotary switch |
||
Firmware Upgrade | Support for manual update using Web UI | ||
LED Indicator |
Status LEDs indicate: - the state of power supply: on/off - Tally: preview/program - the state of input signal: locked/unlocked - the state of loopthrough signal: loopthrough connected and signal detected/undetected |
||
Form Factor | 117.5mm (L) x 66.7mm (W) x 23.4mm (H) | ||
Accessories |
USB 2.0 A to B Cable 5V/2.1A power adaptor Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY) L-bracket LED matrix panel (optional) |
||
Power Consumption | 5V max current: ~2A / Max power consumption: ~10W | ||
Working Environment |
Operating temperature: 0 to 45 deg C Storage temperature: –20 to 70 deg C Relative Humidity: 5% to 90% non-condensing |
以上資料僅供參考,實際規格請以原廠產品公佈資訊為標準,如有更新,不另行通知