ConvertIP

Matrox ConvertIP standards-based IPMX.SMPTE ST 2110 transmitters/receivers

產品規格

ConvertIP SRS 雙通道 RJ45 SDI-to-IP 發射/接收轉換器

Product
Part Number	CIP-SRS
Form Factor	• Standalone appliance • Rack mountable: 1U, 1/3 rack (horizontal)
Connectivity
Video Input	• TX mode: 12G SDI • RX mode: No input
Video Output	• TX mode: No output • RX mode: 12G SDI
Video Input Resolutions	HD and 4K resolutions (including broadcast)
Genlock	No
VANC ancillary data processing	Yes1
Audio Input/Output	Up to 16 channels of audio embedded in SDI output signal
Network Connector	1x RJ45 LAN port for Media and Control with PoE+ (1/2.5G)
RS-232	No
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Color Space	• YUV 4:2:2 10-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP Support	Not applicable
Encoding formats
Video2	• ProAV 4:4:4 8-bit codec; HD 200 Mbps, 4K 800 Mbps • Optional: JPEG-XS 4:2:2 10-bit; HD 400 Mbps, 4K 1.6 Gbps Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content  Colibri codec included  4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps   JPEG-XS codec upgrade required3   4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -22, -30, -401) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	No
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.09 lbs / 495 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) • Line Voltage: 100-240 V a.c., 0.5A • Frequency: 50-60 Hz • Input: IEC320-C14 • Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP SRS appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to three ConvertIP SRS units in a 1RU space.

ConvertIP SRH 單通道 RJ45 HDMI-to-IP 發射/接收轉換器

Product
Part Number	CIP-SRH
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/3 rack (horizontal)
Connectivity
Video Input	1x HDMI
Video Output	1x HDMI
Video Resolutions	Most desktop resolutions up to 4Kp60
Audio Input/Output	Up to 8 channels of audio embedded in HDMI signal
Network Connector	1x RJ45 LAN port for Media and Control with PoE+ (1/2.5G)
RS-232	No
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Bit depth and color space	• YCbCr 4:2:0 10-bit1 and 8-bit1 • YCbCr 4:2:2 10-bit • RBG 4:4:4 8-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP Support	HDCP 1.4 and 2.2 support
Encoding formats
Video2	Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network Standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -22, -30) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	No
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 5.5 (W) x 1.42 (H) inches 181 (D) x 138 (W) x 36 (H) mm
Unit Weight	1.44lbs/655 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP SRH appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • Secure cable solution for HDMI (Part #: SK-SLND-4) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional Software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

ConvertIP DRH 雙通道 RJ45 HDMI-to-IP 發射/接收轉換器

Product
Part Number	CIP-DRH
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	1x HDMI(zero latency pass-through in TX mode)
Video Input Resolutions	Most desktop resolutions up to 4Kp60
Audio Input/Output	• Up to 8 channels of audio embedded in HDMI signal • Unbalanced analog stereo input via 1/8“ (3.5mm) jack1 • Line Level
Network Connector	3x RJ45 ports • LAN 1 for Media and Control with PoE+ (1/2.5G) • LAN 2 for redundant Media and Control (1/2.5G) • Control LAN for Control data only (100/1000 Mbps)
RS-232	Yes1
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Color Space	• YCbCr 4:2:0 10-bit1 and 8-bit1 • YCbCr 4:2:2 10-bit • RBG 4:4:4 8-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP Support	HDCP 1.4 and 2.2 support
Encoding formats
Video2	Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -22, -30) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	Yes (ST 2022-7)
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.40 lbs / 635 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP DRH appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-SERV)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • Secure cable solution for HDMI (Part #: SK-SLND-4) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

ConvertIP DSH 雙通道 SFP HDMI-to-IP 發送/接收轉換器

Product
Part Number	CIP-DSH
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	1x HDMI
Video Outputs	1x HDMI (zero latency pass-through in Tx mode)
Video resolution	Most desktop resolutions up to 4Kp60
Audio Input/Output	• Up to 8 channels of audio embedded in HDMI signal • Unbalanced analog stereo input via 1/8″ (3.5mm) jack1 • Line Level
Network Connector	• 2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2 - 10 GbE IEEE 802.3ae (10GBASE-SR/LR fiber module) - 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S) - 25 GbE IEEE 802.3cc (25GBASE-LR) • LAN2 for redundancy mode only • Dedicated RJ45 management network interface for control only with PoE+ (100/1000 Mbps)
RS-232	Yes1
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Color Space	• YUV 4:2:0 10-bit1 and 8-bit1 • YUV 4:2:2 10-bit • RGB 4:4:4 8-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes
Color Space Conversion	Yes1
HDCP Support	HDCP 1.4 and 2.2 support
Encoding formats
Video2	Uncompressed • HD 3 Gbps and 4K 12 Gbps - Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, 20, -21, -22, -30) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	Yes (ST 2022-7)
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.66 lbs / 755 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP DSH appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • Secure cable solution for HDMI (Part #: SK-SLND-4) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

ConvertIP DRS 雙通道 RJ45 SDI-to-IP 發射/接收轉換器

Product
Part Number	CIP-DRS
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	• Tx mode: 1.5G, 3G, and 12G SDI • Rx Mode: No input
Video Output	• Tx mode: No output • Rx mode: 1.5G, 3G, and 12G SDI
Video Resolutions	HD and 4K broadcast resolutions
Genlock	Bi-Level and Tri-Level input support
VANC ancillary data processing	Yes1
Audio Input/Output	• Up to 16 channels of audio embedded in SDI output signal • Unbalanced analog stereo input via 1/8“ (3.5mm) jack1 • Line Level
Network Connector	3x RJ45 • LAN 1 for Media and Control with PoE+ (1/2.5G) • LAN 2 for redundant Media and Control (1/2.5G) • Control LAN for Control data only (100/1000 Mbps)
RS-232	Yes1
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Color Space	• YCbCr 4:2:2 10-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP support	Not applicable
Encoding formats
Video2	Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network Standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -22, -30, -401) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	Yes (ST 2022-7)
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.47lbs / 665g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP DRS appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB))
Software	• Matrox ConvertIP Command Center (Web UI) • Matrox ConvertIP Manager (Microsoft Windows 10)
Optional software	JPEG-XS codec license
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

ConvertIP DSS 雙通道 SFP SDI-to-IP 發送/接收轉換器

Product
Part Number	CIP-DSS
Form Factor	•Standalone appliance •Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	•Tx mode: 1.5G, 3G, and 12G SDI •Rx mode: No input
Video Output	•Tx mode: No output •Rx mode: 1.5G, 3G, and 12G SDI
Video Resolutions	HD and 4K broadcast resolutions
Video Output Resolutions	HD and 4K broadcast resolutions
Genlock	Bi-Level and Tri-Level input support
Ancillary Data Processing	Yes1
Audio Input/output	•Up to 16 channels of audio embedded in SDI output signal •Unbalanced analog stereo input via 1/8“ (3.5mm) jack1 •Line Level
Network Connector	•2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2 • 10 GbE IEEE 802.3ae (10GBASE-SR/LR) • 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S) • 25 GbE IEEE 802.3cc (25GBASE-LR) • LAN2 for redundancy mode only • Dedicated RJ45 management network interface for control only with PoE+ (100/1000 Mbps)
RS-232	Yes1
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Bit depth and color space	• YCbCr 4:2:2 10-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP support	Not applicable
Encoding formats
Video2	Uncompressed • HD 3 Gbps and 4K 12 Gbps - Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network Standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	•IPv4 •IPv61 •DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -20, -21, -22, -30, -401) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	Yes (ST 2022-7)
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.70 lbs / 770 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP DSS appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	•CE (EU) •FCC (USA) •ICES-003 (Canada) •KC (Korea) •RCM (Aus/NZ)
Environmental Compliance	•China RoHS •EU RoHS •REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

ConvertIP SRST 單通道 RJ45/SFP HDBase 轉 IP 發送/接收轉換器

Product
Part Number	CIP-SRST
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	• TX mode: HDBaseT v3 • RX mode: No input
Video output	• TX mode: No input • RX mode: HDBaseT v3
Video resolution	HD and 4K resolutions (including broadcast)
Audio Input/Output	Up to 8 channels of audio embedded
Network Connector	• 1x RJ45 LAN for Media and Control with PoE+ • 1x SFP28 cage for Media/Control - 10 GbE IEEE 802.3ae (10GBASE-SR/LR) - 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S) - 25 GbE IEEE 802.3cc (25GBASE-LR)
RS-232	No
Control and management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Bit depth and color space	• YCbCr 4:2:0 10-bit1 and 8-bit1 • YCbCr 4:2:2 10-bit • RBG 4:4:4 8-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP Support	HDCP 1.4 and 2.2 support
Encoding formats
Video2	Uncompressed • HD 3 Gbps and 4K 12 Gbps - Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network Standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -20, -21, -22, -30) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	No
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.70 lbs / 770 g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP SRST appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software	• JPEG-XS codec license • Crestron Module to expand existing controlled environments
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

Matrox VERO SMPTE ST 2110 媒體設備製作的必備工具

Product
Part Number	MTXVero
Form Factor	Rack-mountable: 1U (horizontal)
Connectivity
Control and Management	Web-based interface compatible with any browser, including mobile devices REST-based API for easy automation
Network	2x SFP28 cages for ST 2110 interface • 10 GbE IEEE 802.3ae (10GBASE-SR/LR) • 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S) •25 GbE IEEE 802.3cc (25GBASE-LR) Dedicated RJ-45 management network interface (1GbE)
Supported Media Standards and Specifications	SMPTE ST 2110 (-10, -20, -21, -30, -31* and -40), ST 2022-7, and ST 2059-2 AMWA NMOS IS-04 and IS-05
Signal Generator
Video	According to SMPTE ST 2110-20 and ST 2110-21 •3840x2160p @ 50, 59.94 and 60 Hz •1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 Hz •1920x1080i @ 25, 29.97M and 30 Hz •1280x720p @ 50, 59.94 and 60 Hz ITU-R BT.709 and BT.2020
Audio	According to SMPTE ST 2110-30 •ST 2110-30 Classes A, B & C •1 to 64 channels per flow •PCM 24bit @ 48 kHz •Packet times of 125 μs or 1ms
Ancillary Data	According to SMPTE ST2110-40 •ATC •AFD and bar data
PTP	ST2059-2 compliant Supported on each SFP for redundancy
Adjustable Parameters	User presets for SMPTE ST 2110-21 sender types: N (Narrow), NL (Narrow Linear), W (Wide), or custom Custom packet timing for granular control of number of packets present in the Network Compatibility Model (up to and beyond CMAX) and Virtual Receiver Buffer Model (up to and beyond VRXFULL) User-controllable RTP timestamp offset per flow
Capture and Analysis
PCAP Recording	Aggregated capture throughput of up to 28Gbps with hardware-based timestamping Available on both ST 2110 interfaces (primary, redundant or both simultaneously) Input routing of sources through: •Manual settings (IGMP) •NMOS IS-05 control •SDN control Auto detection of ST 2110 flows on inputs
EBU Live IP Software Toolkit (LIST©)	Open source ST 2110 analysis toolkit Deep packet inspection for ST 2110 specification compliance Pre-installed for convenience
Physical
Product Dimensions	22.73 (D) x 18.97 (W) x 1.68 (H) inches 57.75 (D)  x 48.2 (W) x 4.28 (H) cm
Unit Weight	27.38 lbs / 12.42 kg
Power Supply Unit	AC Line voltage: 100-240 V a.c. AC Frequency: 50-60 Hz AC Input current (low/high): 3.7 A/ 7.4 A Wattage: 550 W
Hardware & Software
Hardware Included	Matrox Vero appliance with ST 2110 signal generator, PCAP capture, and stream analysis. Includes racking kit and power cords (US, EUR, UK)
Environmental
Operating Conditions	Temperature: 10 to 35 degrees Celsius Humidity: 20% to 80% non-condensing
General
Warranty	Two-year limited warranty

*本產品將持續創新，規格可能會有變動，當產品設計／規格變動，恕不另行通知。