ConvertIP DSH 雙通道 SFP HDMI-to-IP 發送/接收轉換器
Product | |
Part Number | CIP-DSH |
Form Factor |
• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal) |
Connectivity | |
Video Input | 1x HDMI |
Video Outputs | 1x HDMI (zero latency pass-through in Tx mode) |
Video resolution | Most desktop resolutions up to 4Kp60 |
Audio Input/Output |
• Up to 8 channels of audio embedded in HDMI signal • Unbalanced analog stereo input via 1/8″ (3.5mm) jack1 • Line Level |
Network Connector |
• 2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2
- 10 GbE IEEE 802.3ae (10GBASE-SR/LR fiber module)
- 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S)
- 25 GbE IEEE 802.3cc (25GBASE-LR)
• LAN2 for redundancy mode only
• Dedicated RJ45 management network interface for control only with PoE+ (100/1000 Mbps) |
RS-232 | Yes1 |
Control and Management |
• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application) |
Performance | |
Maximum Video Resolutions |
4096 x 2160 60p |
Color Space |
• YUV 4:2:0 10-bit1 and 8-bit1 • YUV 4:2:2 10-bit • RGB 4:4:4 8-bit • SDR/HDR1 |
Video and Audio Processing | |
Video Scaling | High Quality multi-tap 10-bit Up/Down Scaler |
Video Deinterlacing | Yes |
Color Space Conversion | Yes1 |
HDCP Support | HDCP 1.4 and 2.2 support |
Encoding formats | |
Video2 |
Uncompressed • HD 3 Gbps and 4K 12 Gbps - Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps |
Audio | Uncompressed PCM (~1 Mbps/ch) |
Latency | Less than a 1/4 frame (<4 ms) |
Network | |
IP Addressing |
• IPv4 • IPv61 • DHCP (default) and static IP |
Supported Protocols |
• SMPTE ST 2110 (-10, 20, -21, -22, -30) • SMPTE 2059 (-1, -2) • IPMX ready |
Redundancy | Yes (ST 2022-7) |
Command and Control | HTTPS over TCP |
Discovery, Registration and Control | NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1 |
PoE+ | Yes (IEEE 802.3at Type 2) |
Physical | |
Product Dimensions | 7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm |
Unit Weight | 1.66 lbs / 755 g |
Cooling | Fanless |
Power |
• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector |
Hardware and Software | |
Hardware Included | ConvertIP DSH appliance |
Optional Hardware | ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA) |
Accessories (sold separately) |
• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • Secure cable solution for HDMI (Part #: SK-SLND-4) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB) |
Optional software | • JPEG-XS codec license • Crestron Module to expand existing controlled environments |
Environmental | |
Operating Conditions |
Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing |
Storage Conditions | Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing |
General | |
EMC/EMI Device Class | Class A |
EMC/EMI Compliance |
• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ) |
Environmental Compliance |
• China RoHS • EU RoHS • REACH |
Warranty | Three-year limited warranty with free online or telephone support |
1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.