ConvertIP DRS

Matrox ConvertIP standards-based IPMX.SMPTE ST 2110 transmitters/receivers

產品規格

ConvertIP DRS 雙通道 RJ45 SDI-to-IP 發射/接收轉換器

Product
Part Number	CIP-DRS
Form Factor	• Standalone appliance • Rack-mountable: 1U, 1/2 rack (horizontal)
Connectivity
Video Input	• Tx mode: 1.5G, 3G, and 12G SDI • Rx Mode: No input
Video Output	• Tx mode: No output • Rx mode: 1.5G, 3G, and 12G SDI
Video Resolutions	HD and 4K broadcast resolutions
Genlock	Bi-Level and Tri-Level input support
VANC ancillary data processing	Yes1
Audio Input/Output	• Up to 16 channels of audio embedded in SDI output signal • Unbalanced analog stereo input via 1/8“ (3.5mm) jack1 • Line Level
Network Connector	3x RJ45 • LAN 1 for Media and Control with PoE+ (1/2.5G) • LAN 2 for redundant Media and Control (1/2.5G) • Control LAN for Control data only (100/1000 Mbps)
RS-232	Yes1
Control and Management	• Matrox ConvertIP Command Center (web UI) • Matrox ConvertIP Manager (software application)
Performance
Maximum Video Resolutions	4096 x 2160 60p
Color Space	• YCbCr 4:2:2 10-bit • SDR/HDR1
Video and Audio Processing
Video Scaling	High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing	Yes1
Color Space Conversion	Yes
HDCP support	Not applicable
Encoding formats
Video2	Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps • JPEG-XS codec upgrade required3 - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio	Uncompressed PCM (~1 Mbps/ch)
Latency	Less than a 1/4 frame (<4 ms)
Network
Network Standard	RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP Addressing	• IPv4 • IPv61 • DHCP (default) and static IP
Supported Protocols	• SMPTE ST 2110 (-10, -22, -30, -401) • SMPTE 2059 (-1, -2) • IPMX ready
Redundancy	Yes (ST 2022-7)
Command and Control	HTTPS over TCP
Discovery, Registration and Control	NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+	Yes (IEEE 802.3at Type 2)
Physical
Product Dimensions	7.13 (D) x 7.53 (W) x 1.42 (H) inches 181 (D) x 191 (W) x 36 (H) mm
Unit Weight	1.47lbs / 665g
Cooling	Fanless
Power	• Device: Input: 12 volts, max 18 Watts • PoE+ • Optional PSU (sold separately) - Line Voltage: 100-240 V a.c., 0.5A - Frequency: 50-60 Hz - Input: IEC320-C14 - Output: DIN4 locking power connector
Hardware and Software
Hardware Included	ConvertIP DRS appliance
Optional Hardware	ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)	• ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 • Rackmount kit (Part #: RMK-19TR-A)5 • Angled bracket kit (Part #: RMK-6BRKT-A) • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB))
Software	• Matrox ConvertIP Command Center (Web UI) • Matrox ConvertIP Manager (Microsoft Windows 10)
Optional software	JPEG-XS codec license
Environmental
Operating Conditions	Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing
Storage Conditions	Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing
General
EMC/EMI Device Class	Class A
EMC/EMI Compliance	• CE (EU) • FCC (USA) • ICES-003 (Canada) • KC (Korea) • RCM (Aus/NZ)
Environmental Compliance	• China RoHS • EU RoHS • REACH
Warranty	Three-year limited warranty with free online or telephone support

1. Available in a future software update.
2. Bitrates will vary according to resolution.
3. For more information, contact your Matrox Video representative.
4. Part # EPS40W-10PK does not include IEC-C14 power cord. These cables must be sourced locally.
5. Can fit up to two ConvertIP DRH units in a 1RU space.

*本產品將持續創新，規格可能會有變動，當產品設計／規格變動，恕不另行通知。