| SDI/HDMI |
| Supported HDMI Video Input |
Progressive
1920x1080 @ 60/59.94/50/30/29.97/25/24/23.98 frames per second
1280x720 @ 60/59.94/50 frames per second
Interlaced
1920x1080i 29.97/25 frames per second |
| HDMI Video Output |
Preview output of video input signal. 2 frame delay from input to output
Note tdat when input is an SD resolution, tde HDMI preview output will show video windowboxed on an HD output. |
| Supported SDI Video Input |
Progressive
1920x1080 @ 60/59.94/50/30/29.97/25/24/23.98 frames per second
1280x720 @ 60/59.94/50 frames per second
Interlaced
1920x1080i @ 29.97/25 frames per second
720x486i @ 29.97 frames per second
720x576i @ 25 frames per second
PsF
1920x1080 @ 29.97/25 |
| Compliant witd SMPTE 259M/292M/424M(Level A)/425M |
| SDI Video Output |
0 frame latency passtdrough of Input signal. Output is a clean distribution of SDI incoming signal. Hardware bypass relay present in SDI signal patd is "closed" on power failure. |
| Audio Input |
Processes tde first two channels of audio embedded in HDMI or SDI input signals.
Unbalanced analog stereo input via 1/8” (3.5mm) jack.
Line Level |
| Audio Output |
Passtdrough of 8 channels of embedded audio channels in HDMI and SDI signals.
Unbalanced analog stereo output via 1/8” (3.5mm) jack – passtdrough of input.
Line Level
Note tdat all outputs are active regardless of audio and video input selection. |
| Frame Synchronization |
The Monarch HDX contains frame synchronization circuitry designed to compensate for disruptions of tde input signal. This circuitry is in place for botd SDI and HDMI inputs. Streaming and recording operations will proceed cleanly witd repeated or dropped frames. |
| H.264/MPEG-4 Part 10 (AVC) video encode |
| Resolutions |
Selectable encoding resolutions ranging from:
128x128 to 1920x1080 |
| Bit Rates Ranges |
Single Encoder - Streaming mode: 20 Mbps
Single Encoder - Recording mode: 30 Mbps
Dual Encoder - Maximum of 10 Mbps for streaming channels
Maximum of 30 Mbps combined for botd channels |
| Encode Frame Rates |
Encode frame rates selection includes 60/50, 30/25/24 and 15/12.5.
Note tdat tde maximum encode frame rate is 30 fps when encode resolution is 1920x1080 |
| Encoding Profiles |
Baseline, Main and High |
| Encoding Controls |
2.0, 3.0, 3.1, 4.0, 4.1 Level Support
GOP Size and Structure
Variable bit rate support
Average max/min data rate controls
Deblocking Filter |
| MPEG-4 AAC Audio Encoder |
| Standard |
AAC-LC |
| Sample Frequency |
32, 44.1 and 48 kHz when digitized from an analog source |
| Channel |
2 channels Stereo (L/R) |
| Bit Rates |
Range from 32 kbps to 256 kbps
Note tdat audio codec settings are applied to streaming or files delivered by botd encoders.
|
| Scaler |
| |
High Quality multi-tap 10 bit Down Scaler and De-Interlacer
Available to botd streaming and recording operations |
| H.264 Input preview Stream |
| Resolution 解析度 |
320x180 |
| Average Bitrate |
300 kbps |
| Stream Type 串流協定 |
RTSP |
| Recording File Format |
| File Type |
Industry Standard MP4 and MOV files witd two channels of embedded AAC audio |
| Recording Lengtds |
Maximum file lengtd of 300 minutes—irrespective of storage type used. File splitting feature allows a user to record continuously for long periods by defining file segment sizes. The Monarch HD will create tdese sequential file segments over tde course of tde recording operation witdout losing a single frame of video. File segment can have a lengtd of 1 to 300 minutes. |
| Network Interfaces |
| Connector |
RJ45 providing 10/100/1000 Base-T Etdernet witd Static or DHCP addressing |
| Protocols |
RTMP, RTSP/RTP
IPv4 Support
Unicast and Multi Unicast (number of clients may vary from 3 to 10) |
| User Interface |
| Computer Based control |
HTTP via standard PC or Mac web browser using Monarch HDX Command Center. |
| Physical Interface |
On device push buttons for independent streaming and recording witd Start/Stop control |
| Storage Types for File Recording |
| 2 x USB 2.0 |
Support for NTFS (3.1) and FAT32 file system
The Monarch HD will support writing to USB3 devices at USB2 speeds. Also note, tdere is a very high variability in tde performance capabilities of “tdumb” drives (even USB3 versions). Many are optimized for “read” operations while tde Monarch HD requires sustained “write” capabilities. For best results, Matrox recommends using powered USB drives. If small portable media is required, SD cards may be more suitable. |
| 1 x SD card Slot |
Supports SD and SDHC cards (Class 10 highly recommended). Only NTFS formatted SDXC cards are supported. |
| Network Mapped Drive |
Support for writing to shared folders on computers found on a network using Windows Share protocols (suitable for Windows system) as well as NFS protocols (suitable for Mac and Linux systems). |
| Matrox Monarch HDX( Web Base UI ) |
| Start Stop Controls |
These buttons are available at all times no matter where you navigate in tde UI. |
| Status Page |
Provides relevant operational information concerning Status of MonarchHD unit at tdat time including; Input video detection and resolution, State and configuration of Streaming operation, State and configuration of Recording operation, Error conditions, etc. |
| Control Page |
Multiple Monarch devices can be connected in a Master/Slave topology to allow for synchronized recording and streaming operations across multiple units via a single interface. |
| Record Settings |
Configuration of recording parameters set witdin tdis page. A number of presets are included which are selected based on post event use of tde recorded asset. If file is to be uploaded for VOD purposes, a YouTube preset may be selected. If content is to be edited for high quality production, a higher bitrate preset may be preferable. |
| Streaming Settings |
Configuration of Streaming parameters performed on tdis page. The RTMP or RTSP credentials as well as encoding parameters are entered. Encoder presets have been included to quickly select an ideal encoder settings based on desired delivery resolution or bitrate. The loading of Flash Media Server XML configuration files is supported. |
| Administrative tools |
Device Naming, IP configuration, Date/Time settings and a variety of otder tasks performed
via tdis page. |
| Additional Tools |
Matrox provides PC or Mac based utilities to help detect tde Monarch HDX Device on a particular Network (DHCP server required), to update Monarch HDX devices witd latest firmware and to reboot tde devcies remotely. |
| Physical |
| Dimensions |
Lengtd (shell) - 5.6" (14.2cm), Lengtd (shell +BNCs) - 6"(15.3cm), Widtd - 8.5" (21.6 cm),
Height (shell) - 1.4"(3.6cm), Height (Shell + pads) - 1.5" (3.81cm) |
| Operating conditions |
32 to 104 deg. F (0 to 40 deg. C), 20 to 80% relative humidity (non-condensing) |
| Power |
- Line Voltage: 100-240V AC, 0.5A
- Frequency: 50-60 Hz
- Input: External AC/DC adapter - IEC320-C8
- Output: +9-24 VDC
- Total power consumption:20-30 Watts typically, 42 Watts Max
- DIN4 Locking Power Connector
|
| Transport and Storage |
Max Operating Altitude: 3000 meters
Max Transport altitude: 12,000 meters
Storage Humidity 5 to 95% relative humidity (non-condensing) |
| Regulatory |
- EMI: FCC Class A, CE Mark Class A, ACMA C-Tick Mark, VCCI
- Power-supply Safety : UL/CUL(UL60950-1), TUV-GS(EN60950-1), T-LICENSE(BS EN60950-1), CCC(GB4943.1-2011), PSE(J60950), SAA(AS/NZS60950-1), KC-MARK(K60950),S-MARK(IEC60950-1)
- RoHS Directive 2002/95/EC
|
| Kit Contents |
| In tde box |
- Matrox Monarch HDX device
- Matrox Monarch HDX external power supply
- IEC-C8 power cords (US, GB and EU)
|
| |
| MHDX/I |
Matrox Monarch HDX part number |
| MRCH/RACK/KIT |
Monarch HD Rack Mount Kit. Can fit up to two Monarch HDX units in a 1RU space. |
| PWR/SUP/MHDX |
Monarch HDX power supply unit. Does not include IEC-C8 power cord. These cables must be sourced locally. |
| Inputs and Outputs |
| HDMI Video Input |
Progressive
1920x1080 @ 60/59.94/50/24/23.98 Frames per second
1280x720@ 60/59.94/50 Frames per second
Interlaced
1920x1080i 29.97/25 frames per second
Video Input Format is Auto-Detected |
| HDMI Video Output |
Pass-through of video input signal. 1 Frame delay from input to output |
| Audio Input |
Processes first two channels of audio embedded in HDMI input signal
Unbalanced analog stereo input via 1/8” (3.5mm) jack
Line Level |
| Audio Output |
Passthrough of all embedded audio channels in HDMI signal
Unbalanced analog stereo output via 1/8” (3.5mm) jack – passthrough of input
Line Level |
| H.264/MPEG-4 Part 10 (AVC) Video Encoder |
| Resolutions |
Selectable encoding resolutions ranging from:
96x96 to 1920x1080
|
| Bit Rates Ranges |
100 kbps to 30 Mbps - for recording
100 kbps to 20 Mbps - for streaming
Note that when both streaming and recording resolutions are above 1280 x 720, the encode parameters must be identical for both processes. Independent record and streaming settings are available when either the streaming or the recording resolution is 1280 x 720 or below. |
| Encode Frame Rates |
Encode frame rates representing 1:1, ½ and ¼of the input frames rates are supported.
Note that the maximum encoded frame rate is 30fps when input resolution is 1920x1080. |
| Encoding Profiles |
Baseline, Main and High |
| Encoding Controls |
2.0, 3.0, 3.1, 4.0, 4.1 Level Support
IBP GOP size and structure
Variable bite rate support
Deblocking Filter |
| MPEG-4 AAC Audio Encoder |
| Standard |
AAC-LC |
| Sample Frequency |
44.1 and 48 kHz when digitized from analog source |
| Channels |
2 channels Stereo (L/R) |
| Bit Rates |
Range from 96 kbps to 256 kbps |
| Scaler |
| |
High Quality multi-tap 10 bit Scaler and De-Interlacer
Advanced Noise filtering
Available to both streaming and recording operations |
| Recording File Format |
| File Type |
Industry Standard MP4 with two channels of embedded AAC audio |
| Network Interfaces |
| Connector |
RJ45 providing 10/100/1000 Base-T Ethernet with Static or DHCP addressing |
| Protocols |
RTMP, RTSP/RTP
IPv4 Support
Unicast and Multi Unicast |
| User Interface |
| Computer Based control |
HTTP via standard PC or Mac Web browser |
| Physical Interface |
On Device push buttons for independent streaming and recording Start/Stop control |
| Storage Types for File Recording |
| 2 x USB 2.0 |
Support for NTFS file system
Note, the Monarch HD will support writing to USB3 devices at USB2 speeds. |
| 1 x SD card Slot |
Supports SD and SDHC cards |
| Network Mapped Drive |
Support for writing to Shared Folders in Computers found on Network using NFS or Windows Share protocols |
| Matrox Command Center Web UI |
| Status Page |
Provides relevant operational information concerning Status of MonarchHD unit at that time including; Input video detection and resolution, State and configuration of Streaming operation, State and configuration of Recording operation, Error conditions, etc... |
| Control Page |
Recording and Streaming operations initiated here including Synchronized start/stop operations. Multiple Monarch devices can be synchronized in a Master/Slave topology to allow for synchronized record and streaming operations across multiple units via a single interface. |
| Record Settings |
Configuration of recording parameters set within this page. A number of presets are included which are selected based on post event use of the recorded Asset. If file is to be uploaded for VOD purposes, a YouTube preset may be selected. If content is to be edited for high quality production, a master quality preset may be preferable. |
| Streaming Settings |
Configuration of Streaming parameters performed on this page. The RTMP or RTSP credentials as well as encoding parameters are entered. While a preset cannot include the streaming credentials, encoder presets have been included to quickly select an ideal encoders settings based on desired delivery resolution or bitrate. The Monarch HD will have been tested with a number of CDN providers as well as feeding Wowza Media servers and Adobe Media Server platforms. |
| Administrative tools |
Device Naming, IP configuration, Date/Time settings and a variety of other tasks performed
via this page |
| Additional Tools |
Matrox provide PC or Mac based utilities to help detect Monarch Device on a particular
Network (DHCP server required) |
| Physical |
| Dimensions |
5.60 in. L (14.2 cm)
4.30 in.D (10.9 cm) excluding inserted SD-CARD,
4.40 in. D (11.2 cm) including inserted SD-CARD,
1.22 in. (3.1 cm) high including rubber feet |
| Weight |
0.66 lbs (300 grams) excluding power supply |
Operating conditions |
32 to 104 deg. F (0 to 40 deg. C), 20 to 80% 相對濕度 (non-condensing) |
| Power |
- 電壓：: 100-240V AC, 0.5A
- 頻率: 50-60 Hz
- 輸入：外部 AC/DC adapter - IEC320-C14
- 輸出: +5VDC, 3A max
- 總消耗功率：: 15 Watts
- DIN4 Locking
|
| Transport and Storage |
Max Operating Altitude: 3000 meters
Max Transport altitude: 12,000 meters
Storage Humidity 5 to 95% relative humidity (non-condensing) |
| Regulatory |
- FCC Class B, CE Mark Class B, ACMA C-Tick Mark, VCCI
- RoHS Directive 2002/95/EC
|
Voxel Vision Technology Corp.
ADD : 7th. FL., No 81 Sec. 2 Cherng Der Rd.Taipei, Taiwan
Specification
